Movable Water Stainless Steel Storage Tank 0.8MPa CAD DWG OEM

Technology

1. Stainless steel storage tanks should meet the requirements of the specified standards, and should be manufactured according to the size requirements of the drawings to avoid dimensional deviations;
2. After the stainless steel storage tank is welded, the fasteners and connectors must not be loosened or leaked. If there is, it should be dealt with in time. The welding seam should be full, and the outer welding surface should be smooth, without slag inclusions, pores, cracks and other defects or problems. The welding seam of the stainless steel tank needs to be polished;
3. The flat bottom plate at the bottom of the stainless steel tank should be flat, and the manhole at the top should be fully welded;
4. If the stainless steel storage tank has an insulation layer, it should be firmly combined with its surface. The material used for the insulation layer should be of good quality;
5. After the stainless steel storage tank is filled with water, there should be no water seepage or leakage, and no obvious deformation;
6. The protruding parts inside and outside the entry hole of the stainless steel storage tank should be flanged and other protective treatments to avoid hurting people.

1. Stainless steel storage tanks are storage tanks made of stainless steel.

2. Compared with ordinary rotomolded storage tanks, stainless steel storage tanks can withstand higher pressures and are widely used in many high-pressure occasions. The invasion of harmful substances and mosquitoes ensures that the liquid stored in the tank will not be polluted by the outside world and will not breed red worms.

3. Therefore, stainless steel storage tanks are mostly used to store and transport food, medicine, and are widely used in the wine industry and dairy industry.